This RGB LED Moodlight
Full schematic and construction details are shown on
this page, as well as the firmware download for those who want to create
their own effects or build their own version from the schematic.
If you're not into programming the kit includes a PIC microcontroller
pre-programmed with the firmware and a number of mood lighting
effects.
Schematic
Download
schematic as PDF
Artwork bottom | Artwork top | Overlay |
The dimensions
of the PCB are 50mm x 50mm.
The PCB
supplied with the kit is professionally manufactured
thru-plated with solder mask top and bottom and screen print
overlay on FR4 laminate with RoHS finish.
If you want to etch your own
PCB you can use the artwork above. Unless you are able
to thru-plate your own PCB you will need to solder component
leads top and bottom where required. Also look for the
single via on the board that will need to be wired through.
|
The HEX file is ready to program directly into a PIC 12F629. The zip file contains the source code which you can modify or just view to see how it works. If you are going to modify the code I recommend you download and install the Microchip MPLAB IDE which will allow you to edit, modify and program the PIC seamlessly.
Description | Filename | Download link |
Source code | rgb101g3.zip, v3.0.3, 14/09/2010 | download |
HEX file ready to program into the PIC | rgb101g3_main.HEX, v3.0.3, 14/10/2010 |
download checksum 0xDC5F |
The HEX file is ready to program directly into a PIC 12F629. The zip file contains the source code which you can modify or just view to see how it works. If you are going to modify the code I recommend you download and install the Microchip MPLAB IDE which will allow you to edit, modify and program the PIC seamlessly.
Description | Filename | Download link |
Source code | rgb101g3.zip, v3.0.3, 14/09/2010 | download |
HEX file ready to program into the PIC | rgb101g3_main.HEX, v3.0.3, 14/10/2010 |
download checksum 0xDC5F |
Souce From: picprojects.org.uk